Filter
Top Products
4-18 Using the MobilePro
Follow these steps to use the Application and Driver CD.
1. Insert the Application and Driver CD in the CD-ROM drive of
your host PC.
! If auto-insert is enabled on your host PC, the CE Setup menu
for the Application and Driver CD appears.
! If auto insert is not enabled, go to Start, Run, browse for the
CD-ROM drive.
The CE Setup menu provides a list of available software on the
Application and Driver CD for use with the host PC and
MobilePro 900.
2. Select the driver or application you want to load.
3. Read any license agreement that appears and click OK to accept
the agreement. The setup program automatically loads the
software.
4. When prompted, click Finish to complete the installation and
return to the CE Setup menu.
Using the Internal Disk Configuration
Utility
The MobilePro provides the Internal Disk Configuration utility, which
allows for the instant recovery of customized applications even after a
cold boot.
In Windows CE devices, the cold boot process erases either
applications installed in SDRAM or system files stored in SDRAM for
applications that are installed in FlashROM. In either case, users have
to reinstall these applications to recover the whole system after a cold
boot (except for the HPC default software).
Follow these steps to use the Internal Disk Configuration utility.
1. Tap Start, Programs, Internal disk configuration utility.