Filter
Top Products
Using the MobilePro 4-5
2. Tap the desired selections to automatically turn on the backlight
either while on battery power or when connected to an AC power
source.
Using auto-on while on battery power
substantially reduces battery life.
Enabling the Suspend Switch
You can configure your MobilePro to power on or off by simply
opening or closing the display cover. The suspend switch acts as a
switch for both the power and the display panel.
With the suspend switch enabled:
! Opening the MobilePro powers on the unit. To power on the unit
while it is open, use the Power button.
! Closing the MobilePro powers off the unit and insures that the
backlight is off as well.
Follow these steps to enable the suspend switch.
1. Tap Start, Settings, then select Control Panel.
2. Double tap the MobilePro Settings icon to launch the dialog box.
Be sure to select the “LCD Suspend/Resume” tab.
3. Select either “Enable suspend while on Battery Power” or “Enable
suspend while on External Power,” or both, to enable the display
linkage switch.
While running on battery power, your NEC
MobilePro will not automatically suspend during synchronization unless
the battery charge is at a very low status. You may want to connect
your MobilePro to an AC power source before synchronizing with your
host PC.