Filter
Top Products
2-14 Introducing the MobilePro
4. Insert a new battery pack as follows:
! Make sure the lock button is in the unlocked position.
! Align the battery connector with the battery bay connector
and align the grooves on the sides of the battery with the rails
in the battery bay.
! Slide the battery into the battery bay. Press the battery into the
connector until it is secure and clicks (locks) into place.
! Slide battery lock button to the locked position.
Inserting the battery pack
A – Battery Groove C – Rail
B – Battery Connector D – Battery Lock Button
Note You cannot use your MobilePro when the battery lock button is
in the unlocked position. The system displays an error message.
The battery does not charge when the battery lock button is in the
unlocked position.
5. Charge the battery. See the section earlier in this chapter,
“Recharging the Main Battery.”