NEC 900 PDAs & Smartphones User Manual


 
Getting Started 1-7
Installing the Backup Battery
A lithium coin-cell battery comes with your MobilePro. This is a
backup battery that maintains system configuration information. Install
this battery before you use the MobilePro. See the following procedure
to install the battery.
The battery can explode if you use a battery
that is not the same type battery (or an equivalent type) that ships with
the MobilePro. Use only the same type battery or an equivalent type
when replacing the battery.
Lithium acts as a catalyst when exposed to water and causes
spontaneous combustion on contact.
Keep the battery away from children. If the battery is swallowed, see a
doctor.
1. Locate the lithium coin-cell battery.
2. Locate the backup battery cover on the bottom of the MobilePro.
Using a coin (for example, a quarter), loosen the screw and
remove the cover.
Locating the backup battery cover and screw
A Screw B Backup Battery Cover