Filter
Top Products
4-12 Using the MobilePro
Using PC Cards
Your NEC MobilePro comes with a PC Card slot that supports one
Type II PC Card. All PC Cards are approximately the same size, have
a standard 68-pin connector and vary only in thickness. PC Cards add a
variety of storage and communication functionality to your MobilePro.
Windows H/PC 2000 supports the hot
swapping of PC Cards. However, to avoid data loss, do not remove a
PC Card while the system is accessing it.
When using a PC Card in the MobilePro, we recommend that you also
use AC power. The batteries alone may not provide enough power for
some PC Cards to operate properly.
Note Use the AC adapter when using PC Cards or the internal
modem. Using the adapter can help you avoid potential data loss
caused by the high-energy consumption of some PC Cards.
Inserting PC Cards
Follow these steps to install a PC Card.
1. With the PC Card facing up, insert the card into the PC Card slot
on the right side of the system.
Inserting a PC Card
A – PC Card Eject Button B – PC Card Slot