Filter
Top Products
Using the MobilePro 4-3
Note The first time you install the main battery, the MobilePro
automatically powers on when you open the display panel.
The first time you power on the MobilePro, the screen contrast may
need adjustment. See the following section, “Making Display Panel
Adjustments,” for details.
If the MobilePro is not used for a specified length of time, it
automatically shuts off. You can select how long the unit remains on
when running on battery power alone through the Power selection in
the Windows CE Control Panel. On the Windows CE desktop, tap
Start, Settings, Control Panel. Double tap the Power icon and select the
Power Off tab to designate a power off time.
Note As a general operation rule, frequently back up and
synchronize data between your MobilePro and your host PC.
Synchronization occurs each time you connect your MobilePro to your
host PC, once initial synchronization is configured. For details, see
Chapter 1.
For information about backing up and restoring data, see the section in
Chapter 3, “Backing Up and Restoring Data.”
Making Display Panel Adjustments
You can adjust the brightness of the display panel in the MobilePro
using two function keys located at the top right of the keyboard.
Increasing panel brightness can dramatically
lower battery life.
Follow these steps to adjust the display panel brightness.
1. Open the display panel and power on the unit.