Filter
Top Products
1-6 Getting Started
2. Insert the main battery as follows:
! Locate the battery lock button on the bottom of the system
(see the following figure).
! Make sure the lock button is in the unlocked position (slide
the button towards the outside of the unit).
! Align the battery connector and tab with the battery bay slot
and connector.
! Align the grooves on the sides of the battery with the rails in
the battery bay.
! Slide the battery into the battery bay. Press the battery into the
connector until it is secure and clicks (locks) into place.
Inserting the main battery
A – Groove C – Battery Bay Rail
B – Battery Connector D – Battery Lock Button
3.
Firmly press the battery until it is secure and locks (clicks) into
place.
4. Slide the battery lock button back to the locked position.
Continue to the next section to install the backup battery.