Filter
Top Products
1-12 Getting Started
If you power off, then quickly power on the
MobilePro, your system might erroneously report the presence of
CompactFlash cards.
In addition, repeatedly powering off and quickly powering on can cause
data loss. NEC Solutions America recommends that you wait ten
seconds after powering off before powering on the MobilePro.
Continue working with the MobilePro 900 as it charges and leave it
connected to AC power after the light turns green.
Note Before using the system for the first time, allow ten hours for
the main battery to fully charge, even if the indicator on the front of the
MobilePro lights green before the full ten hours have passed.
Setting Up the System
This section takes you through the process of setting up your system
for the first time.
Note Before you proceed, be sure you have installed the main
battery and the backup battery and you have connected the AC adapter
to charge your system.
1. Open the display panel to start your MobilePro 900 for the first
time. Press the Power button if the system does not start
automatically.
2. Follow the on-screen instructions to calibrate the touch screen.
Press
Ctrl Alt = to recalibrate at any time.
3. Enter your name, local city, and set the clock for your local time.
4. Be sure to specify a country for modem use. For details, see
“Adjusting MobilePro Settings” in Chapter 4.