Filter
Top Products
Personalizing Your Phone
Page 28 Mitel
®
5360 IP Phone User Guide – Issue 1, June 2010
Switching Keymaps
Keymaps are the default button assignments on your IP phone. Your system administrator may
have programmed an alternate keymap, allowing you to switch between keymap assignments.
Contact your system administrator for more information.
To switch between keymaps when your IP phone is idle:
With the handset on-hook, dial 399. The display shows either ALTERNATE (or)
STANDARD KEYMAP IS ACTIVE.
To switch between keymaps during a call:
Press
(Special), and then dial 399.
Turning the Backlight on or off
You can turn the backlight on or off on your display.
To turn the backlight on:
Click the Backlight On/Off icon ( ) in the Gadget Sidebar.
To turn the backlight off:
Click the Backlight On/Off icon ( ) again in the Gadget Sidebar.
Getting Help
You can access the 5360 IP Phone Help.
To access the 5360 IP Phone Help:
1. Click the Help icon ( ) in the Gadget Sidebar. The Welcome to the 5360 Help System
window appears.
2. Press the information that you want to view, and then do any of the following:
• To navigate to the previous or next window, press or .
• To return to the main Help window, press .
• To exit, press once or twice.
Activating Door Relay
If the Activate Door Relay feature is enabled, you can unlock a door (i.e., “buzz” it open)
through your IP phone.
You can enter the Activate Door Relay feature code while idle or while on a call. This allows you
to activate the feature while talking to a communications device mounted at the door without
first having to hang up. When activated while on a call, the feature will not affect the call in
progress other than to show a short confirmation on the display.
You can add the Activate Door Relay feature to a phone keymap button, just like any other
station feature.
To unlock a door:
While idle or while on a call, dial 332. The door is unlocked.