Filter
Top Products
Mitel
®
5360 IP Phone User Guide – Issue 1, June 2010 Page 19
Personalizing Your Phone
Using the Screen Saver
The IP Phones include an embedded screen saver that you can configure for your display.
By default the screen saver image is disabled. When your IP phone enters screen saver mode,
only the IP phone’s backlight dims. The 5360 IP Phone has a backlit display.
You can enable the screen saver image and when your IP phone enters screen saver mode, the
IP phone’s backlight dims and the embedded nature screen saver images appear on your
display. The images are not changeable.
To configure the screen saver on your IP Phone:
1. Press (Applications).
2. Press Settings, and then press Screen Saver. The Screen Saver menu appears.
3. Configure your screen saver options:
a. Select one of the following screen saver timeout options:
o 15 minutes
o 10 minutes
o 5 minutes
o 1 minute
b. If desired, enable the Display Image option:
o If you enable the Display Image option, the screen saver image appears and
your backlight dims when your IP phone enters screen saver mode, as
specified by the screen saver timeout setting.
o If you disable the Display Image option, only your backlight dims (if your IP
phone has a backlight) when your IP phone enters screen saver mode, as
specified by the screen saver timeout setting. This is the default setting.
c. Configure brightness options if your IP phone has a backlight.
Options include:
o Brightness+: Increases the brightness of the display when your IP phone is
in screen saver mode.
o Brightness-: Decreases the brightness of the display when your IP phone is
in screen saver mode.
o Show Brightness: Shows the brightness level of the display when your IP
phone is in screen saver mode. The display returns to normal after
approximately two seconds.
4. Press Save.
5. Press Close to exit the Applications menu.
To wake your IP phone from screen saver mode:
Lift the handset or press any button to wake the IP phone.