Filter
Top Products
Personalizing Your Phone
Page 20 Mitel
®
5360 IP Phone User Guide – Issue 1, June 2010
Specifying Audio Feedback Options
The Audio Feedback setting allows you to adjust the volume of the audio feedback as well as
the error beeps, and enable or disable the setting.
The error beep volume in the phone is related to the volume of the speaker. You can set the
beep volume using this procedure; however, adjusting the speaker volume also affects the beep
volume.
To adjust the volume of the audio feedback:
1. Press (Applications).
2. Press Settings, and then press Audio Feedback.
3. Set the audio feedback options for the button beep and error beep.
• To turn audio feedback on or off, press or .
• To adjust the volume level, press or .
• To play the beep, press Play button beep or Play error beep.
4. Press Save.
5. Press Close to exit the Applications menu.
Calibrating the Display
You can calibrate the touch display for optimum touch sensitivity.
To calibrate the phone screen for touch accuracy:
1. Press (Applications).
2. Press Settings, and then press Calibrate Display.
3. Touch the center of each + to calibrate the display.
4. Press OK, and then press Close.