Filter
Top Products
Mitel
®
5320/5330/5340 IP Phone User Guide – Issue 5, February 2011 Page 79
Cordless Devices
Cordless Devices
You can use the cordless handset and cordless headset to move around within your office or
adjacent offices. The cordless headset and handset are optional accessories, ordered
separately. For more information, contact your system administrator or local Mitel provider. Both
cordless devices connect to your IP phone through the cordless module, which attaches to the
back of the IP phone. The cordless headset rests and recharges in a headset cradle that
attaches to the side of the IP phone. The cordless handset recharges in the handset cradle.
The Cordless Devices Application provides access to the configuration settings and information
screens that apply to the cordless module and accessories. For more information, see “Pairing
the Cordless Module and Devices” on page 81.
The cordless module is shown here. The IP phone features are explained below.
NOTE
The cordless devices are supported by the 5330/5340 IP Phones only. The 5320 IP
Phone does not support a cordless module or cordless devices.
Feature Function
1 – Cordless Module Attached to the back of the IP phone, the module contains a
light-emitting diode (LED) indicating that a cordless device is
in use; also indicates the pairing of module and a cordless
device.
2 – Cordless Headset Cordless handsfree operation for calls. If you are using the
cordless headset, you do not need to use the handset.
3 – Cordless Headset Charging
Cradle
Provides power to recharge the cordless headset battery.
4 – Cordless Handset Charging
Cover
Provides power to recharge the cordless handset battery.
Replaces the cover supplied with the IP phone for corded
handsets.
5 – Cordless Handset Cordless operation for handset calls. (You can transfer from
the IP phone handset to the cordless headset at any time.)
1
5
2
4
3