Filter
Top Products
Answering and Placing Calls
Page 40 Mitel
®
5320/5330/5340 IP Phone User Guide – Issue 5, February 2011
Assigning Speed-Dial Numbers to Programmable Buttons
You can assign Station or System Speed-Dial numbers to your programmable buttons.
To program a Station Speed-Dial button:
1. With the handset on-hook, dial 397. PRESS THE BUTTON TO PROGRAM appears.
2. Press the feature button that you want to program as a speed-dial button.
3. Dial 382.
4. Do one of the following:
Press (Up) or (Down) to scroll through the speed-dial bin.
Enter the speed-dial bin (0 to 9), or select the menu button designation from the
display (5340 IP Phones only).
To program a System Speed-Dial button:
1. With the handset on-hook, dial 397. PRESS THE BUTTON TO PROGRAM appears.
2. Press the feature button that you want to program as a speed-dial button.
3. Dial 381.
4. Do one of the following:
Press (Up) or (Down) to scroll through the speed-dial location.
Enter the speed-dial location (000 to 999 or 0000 to 4999), or select the menu
button designation from the display (5340 IP Phones only).
NOTE
Before or after assigning the speed-dial number to a programmable button, make
sure the speed-dial number has either a Station Speed Dial bin or System Speed
Dial location assigned to it. For System Speed Dial numbers, numbers are pre-
assigned to the System Speed Dial locations (000 to 999 or 0000 to 4999) by your
system administrator. Therefore, you just need to choose a System Speed Dial
location that you want to use (see “Using System Speed Dial” on page 38 for
details). For Station Speed Dial numbers, you must manually store numbers in the
Station Speed Dial bins (0 to 9). See “Storing Station Speed-Dial Numbers” on
page 38.