Filter
Top Products
Mitel 5330 and 5340 IP Phones User Guide
- 81 -
Hang Up
Do one of the following:
Replace the cordless headset in the cradle.
If the headset is already out of the cradle, press the hookswitch button on the headset.
Dialing – Auto Dial Disabled
To dial a number with Auto Dial disabled:
1. Lift the headset or press the hookswitch.
2. Make the call using the dial pad, or press a programmed speed dial key on the phone.
Dialing – Auto Dial Enabled
To dial with Auto Dial enabled:
To dial the predefined Auto Dial number, press the hookswitch on the cordless handset
or headset.
To program Auto Dial, refer to Auto Dial
on page 83.
Headset Alerting Tones and LEDs
The cordless headset provides the following alerting tones:
Feature Function
Mute ON/OFF 2-pitch tone occurs immediately. Reminder tone occurs 30
seconds after activation and then regularly until deactivated.
Mute key on Phone ON/OFF No immediate tone. Reminder tone occurs 30 seconds after
activation and then regularly until deactivated.
Low battery (within 10 minutes left) 3 beeps and 20 second pause
Low battery (within 2 minutes left) 3 rapid beeps and 1.5 second pause
Out of range
Repetitive 3-pitch tone until you are back in range. Note: If
you are out of range for more than 10 seconds, any call that
is in progress is dropped and not recovered.