Filter
Top Products
Mitel 5330 and 5340 IP Phones User Guide
- 42 -
Direct Voice Call
Direct Voice Call feature allows you to establish a two-way handsfree call at another
extension whether or not it has Handsfree Answerback or Auto-Answer turned on. Only
extensions programmed by the system administrator to receive Direct Voice Calls can be
called using this feature.
To make a Direct Voice Call:
1. Lift handset.
2. Dial the appropriate feature access code.
3. Dial the extension you want.
4. Speak to called party.
Do Not Disturb
When you enable Do Not Disturb, callers will get a busy tone, and an on-screen text
message indicating that you do not wish to be disturbed.
To activate or deactivate Do Not Disturb:
Press the Do Not Disturb key that you programmed. The key is highlighted when Do Not
Disturb is activated and is not highlighted when Do Not Disturb is not activated. The
phone status line shows the Do Not Disturb
icon.
To activate Do Not Disturb from a remote extension:
1. Lift handset.
2. Dial the number of the station to which Do Not Disturb is to apply.
3. Hang up.
To deactivate Do Not Disturb from a remote station:
1. Lift handset.
2. Dial the appropriate feature access code.
3. Dial the number of the station with Do Not Disturb activated.
4. Hang up.