Filter
Top Products
Mitel 5330 and 5340 IP Phones User Guide
- 47 -
Group Listen
With Group Listen, you can carry on a conversation using the handset or headset while
allowing others nearby to listen to the person at the far end over the handsfree speaker. The
handsfree microphone is disabled in Group Listen mode.
To activate Group Listen while in a handset conversation:
Press the Group Listen key.
Audio from the far-end party is now heard through both the handset/headset and the
speaker.
To make the call a normal two-way speaker call:
Press
(SPEAKER).
To exit Group Listen mode (and return to a normal handset/headset call):
Press the Group Listen key.
To activate or deactivate Group Listen while in headset mode:
Press the Group Listen key.
Group Paging / Meet Me Answer
Group Paging allows you to page a group of phones through their built-in speakers. You can
belong to as many as three paging groups with one group designated as your "prime" group.
When you need to respond to a Group Page but don't know the identity or directory number
of the paging party, use the Meet Me Answer feature. You have up to 15 minutes after
receiving the page to use Meet Me Answer.
To make a Group Page:
1. Lift the handset.
2. Press Direct Page or dial the appropriate feature access code.
3. Do one of the following:
To page your prime page group, press #.
To page a specific page group, dial the page group directory number.
4. Speak to the dialed party after the tone.
To respond to a Group Page by using Meet Me Answer:
1. Lift handset.
2. Press the key you have programmed to Meet Me Answer or dial the appropriate feature
access code.
(See Programming Features on Your Phone
for instructions on programming features to
your phone.)