Filter
Top Products
Mitel 5330 and 5340 IP Phones User Guide
- 40 -
Direct Paging - Handsfree Answerback Enabled
When you receive a Direct Page, Handsfree Answerback automatically establishes a
Handsfree call on your phone after a single burst of tone.
Your administrator enables or disables Handsfree Answerback on your phone. After your
administrator enables Handsfree Answerback, you can choose to turn it on or off directly from
your phone.
To turn Handsfree Answerback on:
When your phone is idle, press
(MUTE) once. The MUTE key light flashes to indicate
that Handsfree Answerback is ON.
When a Direct Page arrives, the MUTE key light turns OFF and a Handsfree call is
automatically established.
To turn Handsfree Answerback off:
Press the flashing
(MUTE) key once. The MUTE key light turns OFF.
To respond to a Direct Page when Handsfree Answerback is OFF, see Direct Paging -
Handsfree Answerback Disabled
.
Note: By default, Handsfree Answerback is turned OFF at your phone. If the (MUTE) key is
OFF when your set is idle, Handsfree Answerback is OFF.
To answer a call using Handsfree Answerback:
Phone state before Page arrives To answer the Direct Page
Phone is idle and MUTE
is flashing
1. Check that MUTE is OFF.
2. Listen for the paging party.
3. Begin speaking.
4. Lift the handset if you wish to switch from a Handsfree call
to a handset call.
You are on a handset or headset call,
and MUTE is OFF
1. Check that MUTE is flashing.
2. Press MUTE. The light turns ON solid, and you are now
speaking to the paging party and have muted your
handset/headset call.
3. Speak to the paging party. Press MUTE to alternate
between handset/headset and handsfree calls.
You are on a MUTED
handset/headset call, OR, you are on
a Handsfree call
The party paging you receives a busy tone. Handsfree
Answerback does not interrupt your call.