Filter
Top Products
Mitel 5330 and 5340 IP Phones User Guide
- 31 -
To abort the Transfer, press
(CANCEL) at any time before the last digit in the
destination number is dialed.
Note 1: Both the FAC and the destination number can be programmed to a single Speed Call
key.
Note 2: When the phone is in idle state and there are no messages in the mailbox, pressing
the Message key connects you directly to your voice mail.
Conference
To form a Conference when a two–party call is already in place, or to add another party
to an existing Conference:
1. Press
(TRANS/CONF).
2. Dial the number of the next party.
3. Wait for an answer.
4. Press
(TRANS/CONF).
To leave a Conference:
Hang up or press
(CANCEL).
Conference Split
To Split a Conference and speak privately with the original party:
Press the Split softkey.
Add Held
To move a call on hold to another line appearance:
1. Press an available line key.
2. Press the AddHeld softkey.
3. Press the flashing line key.
To add a call on Hold to an existing conversation or conference:
1. Press the AddHeld softkey.
2. Press the flashing line key.