Filter
Top Products
Mitel 5330 and 5340 IP Phones User Guide
- 55 -
Paging
To use Paging:
1. Lift handset.
2. Press the key that you have programmed to Page.
3. Dial the Paging zone number (if required).
4. Make the announcement.
Phone Lock
Phone Lock prevents access to the features on a phone, with the following exceptions:
unlocking the set via a user PIN
Hot Desk Login and Logout support, and
Emergency Call Notification support.
Phone Lock has no effect on incoming calls but restricts outgoing calls, with the following
exceptions:
calls to emergency trunk routes, and
local operators.
Most keys on the device are disabled, except for the dial pad and volume keys. The following
access and keys are disabled:
Superkey access
Applications access
Softkeys
feature access keys
feature access codes, and
account codes
Note: Softkeys will be displayed but disabled, except the hot desking softkeys will remain
enabled. The Phone Lock, Hot Desk login, and Emergency Notification feature access keys will
still be available. Superkey will provide Emergency Notification, if it is pending.
Before locking a set, ensure that:
the set is in the idle state (there should not be any ongoing call)
you do not have any calls on hold or on consultation-hold on any line appearance
you are not in headset mode