Mitel 5215 Telephone User Manual


 
Appendix B — Configuring SIP Settings in the Boot Program
- 51 -
8. To change the phone mode back to SIP from MiNET, repeat steps 1 to 7; however, in
step 4, press SIP.
Note: For information on using the 5215 or 5220 IP Phone in MiNET mode, refer to the 5215
and 5220 IP Phone User Guides of your supporting Mitel Integrated Communications
Platform (ICP) (see Supporting Documentation on page 2).
Factory Default Settings in the Boot Program
Restoring Factory Default Settings in the Boot Program
To restore the phone’s factory default settings in the boot program:
1. Plug the DC adapter cord into the power input, and press and hold
and at the
same time until NETWORK SETTINGS? appears on the display.
2. Press NO until TOOLS AND FEATURES? appears on the display, and then press YES.
3. Press NO until RESTORE DEFAULTS? appears on the display, and then press YES.
STORE CHANGES? appears on the display.
4. Press YES. The factory defaults are restored and the phone reboots for the changes to
take effect. When the date and time appear on the display, the phone is ready for use.
Firmware Versions in the Boot Program
Viewing Firmware Versions in the Boot Program
To view the phone’s current firmware versions:
1. Plug the DC adapter cord into the power input, and press and hold
and at the
same time until NETWORK SETTINGS? appears on the display.
2. Press NO until TOOLS AND FEATURES? appears on the display, and then press YES.
3. Press NO until VIEW VERSION INFO? appears on the display, and then press YES.
4. Press
and to navigate through and view the main, boot and L2boot program
versions. VIEW VERSION INFO? appears on the display at the end of the list.
5. Press NO to return to the main menu.