Filter
Top Products
5215 and 5220 IP Phone SIP User and Administrator Guide
- 36 -
Configuring a User SIP Account
Access the User Configuration page of the Web Configuration Tool (see The Web
Configuration Tool on page 7) to configure the user name and password required to register
a SIP user with the SIP Service Provider.
Modifying the Display Name
The display name is the name displayed on a user’s phone. That name also appears on the
phone display of the party to whom the user is connected. To set or modify the display name,
access the User Configuration page of the Web Configuration Tool (see The Web
Configuration Tool on page 7).
Viewing a User Name
To view the phone’s active user name:
1. Press Superkey.
2. Press the third Personal key (counting upwards from the bottom on the 5215 IP Phone)
or the Line 3 key (5220 IP Phone). The user display name (top) and user name (bottom)
appears.
3. Press Superkey to return to the default display.
View/Modify the Network Settings
Viewing the IP and MAC Addresses
To view the phone’s IP and MAC addresses:
1. Press Superkey, and then press the Line 1 key. The IP and MAC addresses appear.
2. Press Superkey to return to the default display.
Modifying Network Settings
For a list of the network configuration settings available through the Superkey Menu
Interface, see Appendix A — Superkey Menu Interface on page 42.
To modify a phone’s network configuration settings:
3. Press Superkey, and then press >> until ADMIN TOOLS? appears on the display.
4. Press OK, and then press ▼ until NETWORK SETTINGS? appears on the display.
5. Press OK, enter your administrator password, and then press SUBMIT.
6. Press NEXT until the network configuration settings you want to change appear on the
display.
7. Press REVIEW to view the current settings of the selected setting, and then do one of the
following:
• (Optional) To enable or disable DHCP, press TURNON or TURNOFF.