Mitel 5215 Telephone User Manual


 
Using Advanced Features
- 31 -
Deleting a Speed Dial Key
To delete a Speed Dial key:
1. Press Superkey, and then press >> until PROGRAM MEMORY KEYS? appears on the
display.
2. Press OK. SELECT A KEY appears on the display.
3. Press the Personal key from which you want to delete its Speed Dial programming. The
associated programming appears on the display.
4. Press DELETE. DELETE ITEM? appears on the display.
5. Press YES. UNUSED KEY appears on the display.
6. Do one of the following:
To return to the main menu, press EXIT.
To return to the default display, press Superkey.
Making Calls Using Speed Dial
To make a Speed Dial call:
1. Lift the handset.
2. Press the Personal key programmed with the desired Speed Dial. The call is made.
Time and Date
A Simple Network Time Protocol (SNTP) server (version 4 or later) provides your phone with
the date and time; therefore, your Administrator will configure your time zone once using the
Web Configuration Tool, and then an automatic adjustment will occur for Daylight Savings.
However, if an SNTP server is not available in your system setup, you can modify the time
and date using your phone or the Date/Time page of the Web Configuration Tool (see The
Web Configuration Tool on page 7). For more information, contact your Administrator.
Note: You cannot change your time and date settings while on a call.
Note: If your phone loses power, the modified time and date are not saved.
Changing the Time and Date
Important: Use this procedure only if an SNTP server is not provided. You will need to
reprogram these settings every time the phone reboots. If an SNTP server is available and
you manually modify the time and date using the Web Configuration Tool, the SNTP server
will reset your changes to the correct time and date.
To change the display’s time and date:
1. Press Superkey, and then press >> until SETTINGS & OPTIONS? appears on the
display.
2. Press OK, and then press until TIME AND DATE? appears on the display.