Filter
Top Products
36
To send an assigned group
of extensions (except
priority, intercom, and
personal central office
calls) immediately to an
assigned extension,
AUDIX, or message
center for coverage
1 Press (while on-hook or off-hook)
[confirmation tone]
To cancel Send All Calls
or SAC Group
1 Press or again
(while on-hook or off-hook)
or Pick up the handset and dial the Send All Calls
cancel code __________ [confirmation tone]
• Your calls ring at your own voice terminal again
SAC Group
Send All Calls SAC Group
Note: Your voice terminal is set for either the Speaker (listen-only) or the
Speakerphone (listen and talk) function. Check with your system manager to see if
you can use either of these two features.
Use the following procedures if your voice terminal is set for the Speaker
(listen-only) feature.
Speaker
To place a call without
lifting the handset, or to
use speaker with any lis-
tening-only feature activ-
ity (such as, monitoring a
call on which you have
been put on hold or for
group listening)
Note: In order for the
other party to hear you,
you must speak through
the handset and the
speaker must be off.
1 Press
• Red light next to
, and the red light next to
go on
2 Place a call or access the selected feature
3 Adjust speaker volume if necessary
• To raise the volume, press the right half of the
Speaker Volume control button labeled ;
to lower the volume, press the left half of the
Speaker Volume control button labeled .
Speaker
Speaker
Mute