Filter
Top Products
35
To adjust ringer volume
if necessary (handset and
speaker are not active, or
the handset and ringer
are both active)
1 To raise the volume, press the right half of the
Volume control button labeled ;
to lower the volume, press the left half of the
Volume control button labeled
• If you have a display, it shows:
(There are eight possible volume settings. On the
display, one arrow is the lowest setting, and eight
arrows is the highest setting.)
One full ring cycle will sound to demonstrate the
new volume.
RINGER L>>>>> H
Send All Calls
To send all incoming calls
(except priority, intercom,
and personal central office
calls) immediately to an
assigned extension,
AUDIX, or message
center for coverage
1 Press
(while on-hook or off-hook)
or Pick up the handset and dial the Send All Calls
access code __________ [confirmation tone]
Note: You may hear a half ring as each call is sent
to coverage if you have a DEFINITY Generic 2 or a
System 85 R2V4.
Send All Calls