Filter
Top Products
15
Note: An error tone (one beep) may sound when you have made a mistake in your
softkey entries.
Press
at any time to exit Softkey Mode and return to Normal (call-handling)
Mode.
Using the Softkeys to Activate a Feature
Your display and softkeys allow you to access up to 12 switch-related features. For
example, you may want to use the Priority Calling feature to call another extension
with a distinctive 3-burst ring. You can activate this feature with the softkeys in the
following way:
To access a feature with
the softkeys (Priority
Calling is used in this
example)
1 Press
• The display shows the initial feature option
screen:
Exit
Menu
LWC CnLWC AutCB Timer
2 Press
• The display shows:
3 To use the Priority Calling feature, press the softkey
below PCall and then dial the extension.
Note: When the feature is activated, after the
display screen shows you the digits you are dialing,
an arrow appears above the feature, as in the
example below. If there is not an arrow above the
feature, the feature is off.
When both parties hang up from the call, the arrow
above PCall (showing feature status indication)
disappears.
Next
CFrwd CPark TmDay PCall
CFrwd CPark TmDay PCall