Filter
Top Products
31
If you use a feature often, you can program it onto an unused line button for easy access. If you use
a feature occasionally, see Using Features, p. 18. Keep these facts in mind when setting up your
telephone:
• Some features must be programmed on a button or they can’t be used. (These features are
marked with a ♦ on the Programming Codes list, p. 32.)
• Other features (marked with • on the Programming Codes list, p. 32) are settings that affect the
way your telephone works. Some settings, such as Personalized Ring, affect all the lines on your
telephone. During programming, you still have to select a line button, but it can be any line button
the feature affects. Others, such as Delay Ring for a single line, are settings that affect a specific
line and require you to press it during programming (these features are noted on the Program-
ming Codes list, p. 32). Settings remain active until you program them again.
To see whether a feature is programmed on a line button, press the Inspect button and then the line
button. Read the display and press the Exit button (Home button on MLX telephones) to exit.
While programming, either make a selection from the display (press the button next to or below the
item) or use codes. Using codes takes fewer steps but requires the Programming Codes list (see
p. 32). As you program, your telephone beeps.
Programming Buttons & Settings
Display Programming
To program using the display:
1. If programming a feature on a button, label
the button.
2. Press the Menu button and select Ext
Program [Prog].
3. Select Start.
4. Press the line button you are program-
ming. If a feature is already programmed,
its name appears on the display. If you are
programming a setting, either press the
line button affected or press any line
button.
5. Select ListFeature [List] and
search for the feature name using
4. Select the code from the Programming
Codes list (see p. 32) and dial it. If
additional numbers (such as an extension
number) are needed, dial them.
5. Press Enter to finish programming. If
you wish to program another button, begin
again with Step 3. (Label the buttons first.)
6. To exit, press the Feature button and dial
✻00.
Code Programming
To program using programming codes:
1. If programming a feature on a button,
label the button.
2. Press the Feature button and dial 00.
3. Press the line button you are program-
ming. If a feature is already programmed,
its name appears on the display. If you are
programming a setting, either press the
line button affected or press any line
button.
Copyright © 1999, Lucent Technologies. 4424LD+, 4424D+, MLX-20L, MLX-28D, and PassageWay are
registered trademarks of Lucent Technologies in the U.S. and other countries. MERLIN MAGIX is a trademark
of Lucent Technologies in the U.S. and other countries. Mirage, StarSet, and Supra are registered trademarks
of Plantronics, Inc.
FindFeature [Find]. If you see >
on the screen, press the button
(More button on MLX telephones) to see
more feature names. (Consult the Display
Reference, p. 28, if you need help with
abbreviations.)
6. Select the feature. If additional numbers
(such as an extension number) are
needed, dial them.
7. Press Enter to finish programming. If you
wish to program another button, begin
again with Step 4. (Label the buttons first.)
8. Press the Exit button (Home button on
MLX telephones) to exit at any time.