Filter
Top Products
25
Park
Park puts a call on a special type of hold so
that it can be picked up from any telephone
in the system. A user can park a call and
then pick it up at another telephone or can
use Paging to announce the call so that
another person can pick it up. Pick up a
parked call by using the Pickup feature. See
Park & Pickup, p. 26.
To park a call at your own extension on
the button that the call arrived on, do one
of the following:
• Press the programmed Park button.
• Press the Transfer button, dial your
extension, and press Transfer again.
• Press the Feature button and select
Park.
You can also park calls at Park Zones. The
factory setting of the system is to have eight
extensions (881–888) for operator Park
Zones. Ask your System Manager if these
Park Zones are available. If they are, you can
use a DSS button or program an Auto Dial
button (p. 20) with a Park Zone extension.
To park a call at a Park Zone, do one of
the following:
• Press the DSS button for a Park Zone.
• Press the Transfer button and dial a Park
Zone (factory setting: 881–888).
If the parked call is not picked up within the
park return interval (factory setting: 3
minutes), the call rings back at your
telephone.
Often-Used Features
Paging
To program:
See Programming Buttons & Settings, p. 31.
You can page an individual at his or her
telephone by using an ICOM Voice or SA Voice
button (see Line Buttons, p. 3). Or you may be
able to page all speakerphones or groups of
speakerphones, depending upon how your
system is set up. If your company has a
loudspeaker paging system, use it to page the
whole company or just people in a certain paging
zone.
To program or use Speakerphone Paging,
check with your System Manager for Group
Paging or Page All numbers, then:
1. Press any ICOM or SA button and lift the
handset.
2. Do one of the following:
• Dial the Group Paging or Page All
extension number.
• Press the button you programmed for
Group Paging or Page All.
3. After the beep, make the announcement and
hang up.
Ask your System Manager whether
Loudspeaker Paging is available and if there
is a list of paging zones. To use:
1. Press any ICOM or SA button and lift the
handset.
2. Press the Feature button.
3. Select Loudspkr Pg [LdsPg] and dial
the zone, if necessary.
4. Make the announcement and hang up.
To use when a Loudspeaker Page button is
programmed:
1. Lift the handset, press the programmed
Loudspeaker Page button, and dial the zone,
if necessary.
2. Make the announcement and hang up.