Filter
Top Products
27
Privacy
To program:
See Programming Buttons & Settings, p. 31.
Privacy prevents co-workers who share a line
with you from joining your calls. Turn the
feature on before or during a call; it remains
on until you turn it off. A call on hold is not
protected by Privacy. You should program
Privacy on a button so that you have a green
light to remind you when the feature is on.
Saved Number Dial
Must be programmed on a button. To
program:
See Programming Buttons & Settings, p. 31.
Use this feature to redial a busy or unavail-
able number that you want to try later.
To use:
1. Before hanging up, press the programmed
Save Number Dial button.
2. Hang up and press the same type of
button used to place the call (for example,
ICOM, Pool, or SA).
3. Press the programmed Saved Number
Dial button again.
System Speed Dial
To program:
See Programming Buttons & Settings, p. 31.
You can program 3-digit System Speed Dial
codes on a button. These are the same
numbers that are available from the System
Directory (see p. 18). Dial these directly by
pressing the Feature button and dialing the
code (600–729).
Voice Announce
To program:
See Programming Buttons & Settings, p. 31.
Make voice-announced calls from ICOM
Voice or SA Voice buttons on your telephone
(see Line Buttons, p. 3) or use Paging
(p. 25). The Voice Announce feature allows
you to prevent voice announcements and
paging calls from interrupting you. Instead,
the calls ring. Voice Announce is a setting
that you can turn on or off without program-
ming a button for it.
Redial
To program:
See Programming Buttons & Settings, p. 31.
This feature redials the last number you called.
The 4424LD+ and 4424D+ telephones have an
imprinted Redial button; to redial the last
number you called, simply press the Redial
button. On MLX telephones, you should program
Redial on a button.
To use on an MLX telephone:
1. Press the same type of line button used to
placethe first call (for example, ICOM or SA).
2. Do one of the following:
•
Press the programmed Redial button.
•
Press the Feature button and dial 84.
Often-Used Features