Filter
Top Products
63
MOVING ON
Inter-Tel
®
INT3000 User Guide
USING ACCOUNT CODES
If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, the system will periodically print out a record of telephone calls
placed from the endpoints within the system. Account codes can be used to add infor-
mation to these reports.
There are three types of account codes:
• Standard account codes that are entered into the SMDR report automatically
whenever you place a call.
• Forced account codes that you must dial before being allowed to place an outside
call.
• Optional account codes that can be entered at any time during a call.
NOTE: Your customer service representative or system administrator can tell you
which types of account codes are used on your telephone system.
To enter an optional account code:
1. Press and dial .
2. Enter the optional account code. If the account code is not immediately accepted,
press .
To set an account code for all calls placed from your endpoint:
1. Dial
2. Dial the account code. If the account code is not immediately accepted, press
. This code will be used for all calls made from your endpoint until it is dis-
abled.
To disable the code:
Dial and press .
s
p
cl
3
9 9
#
3
9
1
#
3
9
1
#