Filter
Top Products
11
FINDING YOUR WAY
Inter-Tel
®
INT3000 User Guide
Charging Spare Battery Packs (Optional)
1. Slide the spare Battery Pack, if you have one, into
the second slot in the Battery Charger until the
retaining clip snaps over the top of the pack, as
shown on the right.
2. Make sure the BATT CHARGE indicator lights. If
the BATT CHARGE indicator does not light,
check to see that the AC Adapter is plugged in,
and that the Battery Pack is making good contact
with the Battery Charger contacts.
3. Charge the Battery Pack without interruption for 6-
8 hours.
4. When charging is complete, press out on the latch
and remove the Battery Pack for use. Or, if you do not need the Battery pack
immediately, leave it in the Battery Charger. (It will not overcharge.)
NOTE: INT3000 does not come with a spare battery. For those of you who would like
to purchase a spare battery, please contact your local reseller.
Cleaning The Battery Charging Contacts
To maintain a good charge, it is important to clean all charging contacts on the Hand-
set and Battery Charger about once a month. Use a pencil eraser or other contact
cleaner to clean the battery charging contacts, shown below. Do not use any liquids or
solvents.