Filter
Top Products
57
MOVING ON
Inter-Tel
®
INT3000 User Guide
SPEED DIALING
Speed dialing allows you (and your system administrator) to store frequently dialed
numbers for easy dialing. Each number is stored on your endpoint (Station Speed-
Dial) or in the telephone system (System Speed-Dial) and is identified by a location
number. Once programmed, you can then quickly dial these numbers by entering a
feature code and dialling the desired location number. Because the Inter-Tel system
supports both Station and System Speed-Dial numbers, you can have access to over
1000 stored numbers.
Station Speed Dial
You can program and use up to ten personal speed-dial numbers on your endpoint. In
addition, if you have programmable buttons, you can program them as speed-dial but-
tons for one-touch dialing.
NOTE: You can use the Speed-Dial feature even if your endpoint does not have pro-
grammable buttons.
Programming Station Speed-Dial Numbers
To store a speed-dial number, use the Station Speed-Dial Programming feature code
to program the number in a speed-dial location. Use the following table to list the
numbers that you store in speed-dial locations 0-9.
0 _______________________ 5 _______________________
1 _______________________ 6 _______________________
2 _______________________ 7 _______________________
3 _______________________ 8 _______________________
4 _______________________ 9 _______________________