Filter
Top Products
7
FINDING YOUR WAY
Inter-Tel
®
INT3000 User Guide
INSTALLING THE INT3000
Select a location for the INT3000 that avoids excessive heat or humidity. The Base
Unit of your INT3000 can be placed on a desk or tabletop near a standard 120V AC
outlet and telephone line jack. The Base Unit can also be mounted on a standard wall
plate using the Wall Mount Adapter. Keep the Base Unit and Handset away from
sources of electrical noise (motors, fluorescent lighting, computers).
Before using your INT3000, be sure to raise the antenna to the vertical position.
Connecting the Telephone Cord
Connect the telephone cord to the jack on the back of the Base Unit and the other end
to the telephone jack, as shown below.
Connecting the AC Adapters
The smaller AC Adapter, with the yellow ring on the connector, connects to the yel-
low jack on the back of the Battery Charger. The other AC Adapter connects to the
back of the Base Unit, as shown below.
The AC Adapters are equipped with a polarized line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only one way. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If you cannot plug
the AC Adapter into the outlet, contact an electrician about replacing the outlet.
NOTE: Route the power cord where it will not create a trip hazard, or where it could
become worn and create a fire or other electrical hazard.
To Telephone Jack
AC Adapter
Base Unit