Filter
Top Products
16
Inter-Tel
®
Model 8662 Endpoint User Guide
BASIC
FEATURES
PLACING CALLS
The following instructions are for using basic features associated with placing emer-
gency, intercom, and outside calls. You can also use the Station and System speed dial
features when placing a call (see page 19).
Placing Emergency Calls
You do not have to press the Outgoing Call access code ( ) or an OUTGOING but-
ton to dial an emergency service number. In an emergency, dial the appropriate emer-
gency service number directly ( U.S. or
/ Eur.).
Placing Intercom Calls
An intercom call is a call placed to another subscriber in the organization.
To place an intercom call: Dial the subscriber’s extension number. When using Auto
Answer (see page 14), speak after the intercom (IC) confirmation appears.
If the extension is busy, the following feature options are available:
• Camp-on to the busy extension until the subscriber is available (see below).
• Place an Off-Hook Voice Announce (see page 17).
• Queue for the subscriber (see page 17).
• Leave a text message (see page 25).
• Record a voice mail message (see page 26).
Using Camp-on
Use Camp-on to stay on the line and wait for the busy extension to become available.
To
use Camp-on: Stay on the line until the called extension becomes available (do not
hang up). Until the call is answered or sent to voice mail, the extension rings periodi-
cally and the display indicates the waiting call.
IMPORTANT
Contact your system administrator to make sure your system
is correctly configured for emergency service before using
your endpoint. If an emergency call phone number is dialed from
a Session Initiation Protocol (SIP) endpoint located at a remote site
that is not correctly configured, the call will be placed from the loca-
tion where the system is installed instead of the location where the
emergency call was placed. See page 10 for more information on
validating your location for emergency calls.
9
9
1 1
9 9 9 1
1 2
1:30 FRI DEC 16
IC TO JOHN SMITH