Filter
Top Products
Using Wi-Fi
User’s Guide 8–5
12. For increased security, tap 802.1x tab and select the Use
IEEE802.1x network access control checkbox. You should
only check this option if it is supported by your network
environment. Ask your network administrator if you are
unsure.
13. Select EAP type (PEAP or Smart Card/Certificate) from the
listbox.
14. Once you have completed entering the network settings, tap
OK and OK again to exit this menu.
Searching for Networks to Access
Networks that you have already configured are preferred
networks and can be found on the iPAQ Wireless screen >
Settings > Wireless Networks list box. You can choose whether
to connect only to preferred networks or to have your HP iPAQ
search for and connect to any available network (preferred or
not).
1. From the iPAQ Wireless screen, tap > Settings > Wireless
tab.
2. In the Networks to access box, tap the type of network you
want to connect to (All Available, Only access points, or
Only computer-to-computer).
3. To connect only to networks that have already been
configured, clear the Automatically connect to
non-preferred networks checkbox.
Note: If you check the Automatically connect to non-preferred
networks checkbox, your HP iPAQ detects any new networks
and provides you the opportunity to configure them.