Filter
Top Products
Using the Web Interface
Configuring Call Forwarding
Cisco Small Business IP Phone SPA9XX User Guide 76
5
Configuring Call Forwarding
STEP 1 Log in to the web interface.
STEP 2 In the User tab, under Call Forward, you can configure the following fields:
• CFWD All Dest—Forwards all calls to a single number that you enter.
• CFWD Busy Dest—Forwards all calls to another number when the phone is
busy. Enter the number to which to forward calls.
• CFWD No Ans Dest—Forwards calls to another number if there's no answer
at your phone. Enter the number to which to forward calls.
• CFWD No Ans Delay—Number of seconds to delay forwarding calls, if
there is no answer at your phone. Enter the number of seconds to delay.
STEP 3 At the bottom of the page, click Submit All Changes.
Configuring Call Waiting
Call waiting alerts you when you are on a call with a status message and ringing
that another call is incoming. If you turn call waiting off, incoming calls do not ring
your phone if you are on another call, and the caller hears a busy signal or
message.
To turn call waiting on or off:
STEP 1 Log in to the web interface.
STEP 2 In the User tab, under Supplementary Services, locate the CW Setting field.
STEP 3 Choose yes or no to enable or disable.
STEP 4 At the bottom of the page, click Save All Settings.