Filter
Top Products
Using Basic Phone Functions
Using Phone Hardware and Accessories
Cisco Small Business IP Phone SPA9XX User Guide 39
3
Using the Headset with Your IP Phone
To use a wired headset, press the Headset button on your phone and dial the
number to place a call, or press the headset button to answer a ringing call.
To use a wireless headset, lift the receiver off hook before speaking or listening
through the headset.
Switching Between the Handset/Headset/Speakerphone
During a Call
Any of these audio devices can be used during a call. Only one device at a time
can be used.
The handset can be on the hook when using the speakerphone or headset
function. If switching from the handset to the speakerphone, make sure the
speakerphone or headset light is illuminated before placing the handset back on
the hook. (If you are switching from the handset to a wireless headset, however, do
not replace the handset or you will disconnect the call.)
Sending Audio to the Phone Speaker
Choosing this option sends audio to the speaker when the handset is lifted.
STEP 1 Press the Setup button.
STEP 2 Select Preferences.
STEP 3 Choose Send Audio to Speaker > Edit.
STEP 4 Press Y/ N to enable or disable the feature.
STEP 5 Press OK.
STEP 6 Press Save.
NOTE: Steps to use your headset with the
SPA IP Phone may vary. Consult the user
documentation for your headset for more
information.