Filter
Top Products
Installing Your Phone
Before You Begin
Cisco Small Business IP Phone SPA9XX User Guide 13
2
Before You Begin
Before you install and connect your phone, verify with your System Administrator
(if applicable) that the network is ready for the phone, read the safety notices, and
make sure you have all the phone parts and documentation available.
Connecting the Handset
STEP 1 Find the end of the coiled phone cord that has the longer straightened end. Plug
that end into the back of the phone base in the slot marked with a phone symbol.
This port is labeled #5 on the Cisco SPA IP Phone Connections graphic.
STEP 2 Plug in the short straightened end of the handset cord into the jack at the bottom
of the handset (not shown).
NOTE: The RJ-11 port marked “AUX” is
reserved for connection with the SPA932
Attendant Console that works with the SPA962.
It is not for use as a telephone line port.
!
CAUTION: Do not plug a telephone line cord
into the port marked “AUX.”