Filter
Top Products
Using Basic Phone Functions
Setting Do Not Disturb
Cisco Small Business IP Phone SPA9XX User Guide 48
3
STEP 4 Press Clear.
STEP 5 Press OK.
STEP 6 Press Save.
Changing the Call Forwarding Delay
To change the forwarding delay:
STEP 1 Press the Setup button.
STEP 2 Select Call Forward.
STEP 3 Choose CFWD No Ans Delay, and press the Edit button.
STEP 4 Press Clear.
STEP 5 Press OK.
STEP 6 Press Save.
Setting Do Not Disturb
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
If you have voice mail configured, incoming callers immediately reach voice mail. If
voice mail is not configured, callers hear a busy signal or message.
You can also set Do Not Disturb from your PC using the IP Phone Web Interface;
see the ”Setting Do Not Disturb” section on page 75.
To set Do Not Disturb, either:
• Press the DND softkey. The LCD screen indicates that Do Not Disturb is turned
on for your phone; or
• Press the Setup button and select Preferences. Then:
a. Choose Do Not Disturb.
b. Press the Y/ N button to choose Yes .