Filter
Top Products
6-18
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 6 SPA9000 Field Reference
SIP Tab
Auto Attendant Parameters
Internal Music Use Pref Codec
Only
Forces the internal music player to use the preferred codec only.
The default is is no.
Field Description
AA Dial Plan 1 Dial Plan 1 to be used in an AA script. Example: <dialplan src=dp1/>.
The default is: (10x|xxx.)
AA Dial Plan 2 Dial Plan 2 to be used in an AA script. Example: <dialplan src=dp2/>.
The default is: (<:10>x|xxx.)
AA script 1/2/3 AA script. See Chapter 4, Configuring the LVS Auto-Attendant, for the complete syntax.
The default is:
<aa><form id="dir" type="menu">
<audio src="prompt1" bargein="T"/>
<noinput timeout="10" repeat="T"/>
<nomatch repeat="F">
<audio src="prompt3" bargein="T"/>
</nomatch>
<dialplan src="dp1"/>
<match>
<default>
<audio src="prompt2"/>
<xfer name="ext" target="$input"/>
</default></match>
</form></aa>
Daytime AA To enable the daytime Auto-Attendant, select yes. Otherwise, select no.
The default is is yes.
Nighttime AA To enable the nighttime Auto-Attendant, select yes. Otherwise, select no.
The default is is no.
Weekend/Holiday AA To enable this Auto-Attendant, select yes. Otherwise, select no.
The default is is no.
Day Time
Daytime hours for the daytime Auto-Attendant in 24-hour format. Enter the start and
end times in this format: start=hh:mm:ss;end=hh:mm:ss (hh for hours, mm for
minutes, and ss for seconds).
For example, start=9:0:0;end=17:0:0 means that the start time is 9 AM and the end
time is 5 PM. The other hours (5 PM to 9 AM) are considered nighttime hours.
If you do not enter start and end times, the whole day (24 hours) is considered as daytime,
so the nighttime Auto-Attendant is not used, even if it is enabled.