Filter
Top Products
6-16
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 6 SPA9000 Field Reference
SIP Tab
Group 1/2/3/4 Line Ordered comma-separated list of Line indices. SPA9000 attempts to make external calls
for client stations belonging to the group in the order according to this list. Example:
1,3.
The default is is blank, which means that no external calls are allowed for client stations
in this group.
Default Group Line Same as <Group 1/2/3/4 Line>, but applies to the default group.
The default is is 1,2,3,4.
Hunt Groups Defines one or more hunt groups that can be called directly by any client station like a
regular extension. The syntax is the same as <Contact List>. Each defined group
extension and name also appears in the corporate directory. This parameter is parsed twice
by the SPA9000 such that a group member of one group can also be the extension of
another group (that is, one level of recursion allowed).
SIP DIDN Field Determines which field is used to indicate the DID number for an incoming INVITE to a
line interface. The choices are:
• TO UserID—The user-id field of the TO header
• TO Param—A parameter in the TO header with the name specified in <SIP DIDN
Param Name>, such as didn=1234
SIP DIDN Param Name Parameter name to indicate the DID number in an incoming INVITE message.
The default is is didn.
Accept All MWI as Line Choose the line. Choices are 1, 2, 3, 4, or Current. The default is Current.