Filter
Top Products
4-32
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 4 Configuring SPA9000 Features
Enhancements in Release 5.1
Configuring the Streaming Audio Server
The following provides step-by-step procedures for implementing a SAS with an external music source.
Step 1 Connect an RJ-11 adapter between the music source and an FXS port on the SPA9000 (Phone 1 or Phone
2).
Step 2 On the administration web server, click the SIP tab and scroll down to the Streaming Audio Server
section (see
Figure 4-16).
Figure 4-16 Enabling the Streaming Audio Server
Step 3 On the SAS Enable pull-down selection list, select yes.
Step 4 In the MOH Server field of the Call Feature Settings section, enter the User ID configured for the line
attached to the audio source.
Step 5 Click Submit All Changes.
Enhancements in Release 5.1
This section describes feature enhancements introduced in Release 5.1 of the SPA9000. It includes the
following topics:
• Bridge Mode, page 4-32
• REGISTER Enhancement, page 4-33
• Renew DHCP On SIP Request Timeout, page 4-34
In addition, Release 5.1 introduces downloadable prompts for the Auto-Attendant, a feature that is useful
for localization of the SPA9000. For more information about this feature, see the
“Downloading
Prompts” section on page 5-8.
Bridge Mode
In Release 5.1, the <CWFD Bridge Mode> and the <XFER Bridge Mode> parameters were added to
improve the way that the SPA9000 handles call forwarding and call transfer. This section describes the
added functionality provided and includes the following topics:
• Call Forward Bridge Mode, page 4-33
• Call Transfer Bridge Mode, page 4-33