Filter
Top Products
5-12
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 5 Configuring the LVS Auto-Attendant
Switching Between Alternative AAs Using the IVR
Weekends/Holidays This parameter defines the dates of weekends and holidays.
Format:
[wk=n1[,ni];][hd=mm/dd/yyyy|mm/dd/yyyy-mm/dd/yyyy[,
mm/dd/yyyy|mm/dd/yyyy-mm/dd/yyyy];]
The abbreviation wk stands for weekend. The value can be any number, 1 to 7,
to represent Monday to Sunday. Up to four weekend days can be defined.
The abbreviation hd stands for holiday. You do not have to include the year
(yyyy) if you want the same date to apply every year.
Example:
wk=6,7;hd=1/1,7/4
In this example, the weekend includes Saturday (6) and Sunday (7), and the
holidays are January 1st and July 4th every year.
DayTime This parameter defines the daytime hours. (The other hours are considered
nighttime hours.)
Format:
start=hh:mm:ss;end=hh:mm:ss
The abbreviation hh stands for hours and uses the 24-hour format. The
abbreviation mm stands for minutes, and the abbreviation ss stands for seconds.
Example:
start=9:0:0;end=17:0:0
In this example, the start time is 9 AM and the end time is 5 PM. The other
hours (5 PM to 9 AM) are considered nighttime hours.
If you do not enter start and end times, then the whole day (24 hours) is
considered as daytime, so the nighttime Auto-Attendant is disabled, even if the
NightTime AA parameter is set to yes (enabled).
Table 5-3 Parameter Descriptions