Filter
Top Products
13-44
User Guide for Cisco Unified Operations Manager
OL-19470-01
Chapter 13 Generating Audio Phone and Video Phone Reports
Using Video Phones Reports
Tip Phones that have moved and do not run Cisco Discovery Protocol (CDP) do not appear in this report. For
example, 30VIP and 12SP+ do not run CDP; you will not see move entries for them.
Using the Video Phone Audit Report
The Video Phone Audit report shows the changes that have occurred in the managed video phone
network. For example, this report shows you the video phones that have been added to or deleted from
your network, or changes in video phone status. Phone status changes occur, for instance, when a phone
becomes unregistered with the Cisco Unified Communications Manager.
You can see what has changed within the last 30 days. Audits are maintained in the database for a period
of 30 days, after which they are purged.
Information for the Video Phone Audit report is gathered by IP Phone Movement Tracking (see
Understanding IP Phone Movement Tracking, page 13-28). IP Phone Movement Tracking runs every
5 minutes, so you can run the Video Phone Audit Detail report and obtain fresh data about once every
5 minutes. This interval is not configurable.
Step 1 Select Reports > Video Phones > Video Phone Audit. The Video Phone Status Reports page appears.
Column Description
Extension Extension number of the video phone. The Extension column has two
subcolumns—Old and New:
• Old—Extension number of the video phone before it was moved.
• New—Extension number of the video phone after it was moved.
IP Address IP address of the video phone.
MAC Address MAC address of the video phone.
CCM Address Cisco Unified Communications Manager address. The CCM Address column
has two subcolumns:
• Old—CCM address of the video phone before it was moved.
• New—CCM address of the video phone after it was moved.
Switch Address IP address of the switch to which the video phone is connected. The Switch
Address column has two subcolumns:
• Old—Switch address used by the video phone before it was moved.
• New—Switch address used by the video phone after it was moved.
Switch Port Switch port used by the video phone. The Switch Port column has two
subcolumns:
• Old—Switch port used by the video phone before it was moved.
• New—Switch port used by the video phone after it was moved.
Time Stamp Reflects the date and time that Operations Manager detected the video phone
move.