Filter
Top Products
13-41
User Guide for Cisco Unified Operations Manager
OL-19470-01
Chapter 13 Generating Audio Phone and Video Phone Reports
Using Video Phones Reports
For example, if you enter two phone models, such as 7910 and 7935, in the Video Phone Model field,
the report that results includes all phones of these models. If, in addition, you enter a VLAN ID and a
switch, the report is filtered to include only phones of the models specified that are connected to the
switch and in the VLAN that you selected.
Step 1 Enter values in one or more fields, described in the following table.
GUI Element Description/Action
Find Video Phones
where list boxes and
field
From left to right:
• Select one of the following:
–
Extension number
–
IP Address
–
MAC Address
• Then select one of the following:
–
is exactly
–
begins with
–
contains
–
ends with
• Enter a value.
VLAN Name field Enter the name of the VLAN.
VLAN ID field Enter the VLAN ID.
Video Phone Status
radio buttons
Select one:
• Registered
• Unregistered
• All—Registered and unregistered phones.
SRST radio buttons Select one:
• SRST—Configured to fail over to an SRST router in case of a WAN link
failure.
• Non-SRST—Not configured for SRST.
• All—SRST and non-SRST.
IP Phone Types field Enter a comma-separated list of phone types. Edit the entries in the field
directly or select from a list of phone models, as follows:
1. Click . The Select IP Phone Types list appears.
2. Select the desired video phone types from the list. (Use the Control key or
the Shift key to select more than one video phone type from the list.)
3. Click OK.