Filter
Top Products
13-13
User Guide for Cisco Unified Operations Manager
OL-19470-01
Chapter 13 Generating Audio Phone and Video Phone Reports
Using Audio Phones and Applications Reports
For more information, see the following topic:
•
Phones Report Tool Buttons
The following report tool buttons might appear in the upper-right corner of Audio Phones and
Applications or Video Phone reports.
Switch Address IP address of the switch to which the IP phone is connected.
Port Switch port used by the IP phone; for example, Fa0/12.
Port Status Status of the port used by the IP phone: up or down.
VLAN Name Name of the VLAN (user-defined name); for example, voice.
VLAN ID ID of the VLAN for the IP phone; for example, 100.
SRST Mode One of the following:
• yes—The phone is in SRST mode
• no—The phone is not in SRST mode
• ?—The phone is suspected to be in SRST mode
• —(dash)—The phone is not an SRST phone
SRST Router One of the following:
• IP address of the router that the phone is using for SRST
• —(dash)
Serial No. IP phone serial number
Note This information is obtained by phone polling. See Understanding
Phone Polling, page 13-28.
Application ID Identifier of the firmware running on the phone
Note This information is obtained by phone polling. See Understanding
Phone Polling, page 13-28.
Load ID Identifier of the factory-installed load running on the phone
Note This information is obtained by phone polling. See Understanding
Phone Polling, page 13-28.
Launch button Click and select a menu item to configure tests for the IP phones selected
on this report.
Table 13-5 IP Phone Reports (continued)
Columns and Buttons Description/Action