Filter
Top Products
4-2
Troubleshooting Guide for Cisco Unified MeetingPlace Express Release 1.2
OL-11303-01
Chapter 4 Exception Codes and Module Numbers Used in Cisco Unified MeetingPlace Express
Exception Codes
Table 4-1 Important Exception Codes in Cisco Unified MeetingPlace Express
Code
(Dec)
Code
(Hex) Severity Display Text Comments
131157 0x20055 MAJOR Time has been set backwards.
Some resource reservations may
be lost.
The system clock has been set
back to at least the previous
month since the last time the
Cisco Unified MeetingPlace
Express application was
running. This can result in loss
of some resource reservation
records.
Recommended Action:
Verify the system clock.
Always shut down the Cisco
Unified MeetingPlace Express
application before changing
the clock.
131192 0x20078 MAJOR The CS is behind ## seconds.
Conf ##, Next Event ##, Time ##
The conference management
software has fallen behind
processing conference life
cycle events. This can indicate
the system is overloaded. It
can be a normal result of a
system being down for a while.
Repeated alarms about a
failure to catch up may
indicate a software defect.
Recommended Action:
No action required.
131198 0x2007E INFO No ports left to extend meeting.
Erc ##,Now ##, Length ##, Ports
##
The Cisco Unified
MeetingPlace Express system
was unable to extend a
meeting due to lack of
available voice ports.
Recommended Action:
No action required.
196686 0x3004E MINOR Too many conference events.
Next event = ##, Conf = ##, Max
events = ##
Probably indicates too many
people entering or leaving a
meeting at the same time,
overloading the ability of the
Cisco Unified MeetingPlace
Express system to queue up
entry or exit announcements.
Recommended Action:
No action required.