Filter
Top Products
2-2
Troubleshooting Guide for Cisco Unified MeetingPlace Express Release 1.2
OL-11303-01
Chapter 2 Backing Up, Archiving, and Restoring Data in Cisco Unified MeetingPlace Express
Archiving Data
Archiving Data
You can use the Cisco Unified MeetingPlace Express Administration Center to configure the system to
automatically archive data. However, if you want to manually archive data, follow these steps:
Procedure
Step 1 Log in to the Cisco Unified MeetingPlace Express operating system as the mpxadmin user.
Step 2 At the password prompt, enter the mpxadmin password.
The Cisco Unified MeetingPlace Express operating system desktop appears.
Step 3 Right-click on the desktop.
Step 4 From the menu, select New Terminal. This brings up a terminal session.
Step 5 Manually archive the data by entering the following:
sudo $MP_DATABASE/db-maintenance/archive.sh
Note The archive.sh script uses remote log-in credentials that are defined in the
$MP_DATABASE/db-maintenance/settings.config file. You can set these credentials through
the Cisco Unified MeetingPlace Express Administration Center.
Step 6 On the desktop, click RedHat > Network Services.
Step 7 Click Log out.
Restoring Data
Restoring data recreates the database server data from backed-up storage spaces and logical log files. You may
need to restore your data if you need to replace a failed disk that contains database server data, if there is a
logic error in a program that has corrupted the database, if you need to move your database server data to a
new computer, or if a user accidentally corrupts or destroys data.
To restore data up to the time of the failure, you must have at least one L0 backup. The restore is done using
the Informix command called ontape. Cisco Unified MeetingPlace Express provides a script called
restore.sh that guides you through the restore process. The script is in the $MP_DATABASE/db-maintenance
directory.
Backups have several levels (L0, L1, and L2). To restore the data, you must have the backup files in the
correct order. For example, if you have the correct L0 and L2 backup files, but not the appropriate L1
backup file, you cannot restore the data. This requires extra caution if you manually back up files on a
local disk or in the archiving location.
Caution You can only restore a database that is from the same version of the Cisco Unified MeetingPlace Express
product. You cannot restore a database from a previous version.
The names of the databases that you are restoring from and restoring to must be the same.
Follow these steps to restore data from a backup file: