Filter
Top Products
5-24
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-20851-01
Chapter
Managing the User Options Web Pages
Step 4 Click Device Association.
The User Device Association window displays.
Enter the appropriate search criteria and click Find.
Step 5 Choose the device that you want to associate with the end user by checking the box to the left of the
device.
Step 6 Click Save Selected/Changes to associate the device with the end user.
Step 7 From Related Links drop-down list box in the upper, right corner of the window, select Back to User,
and click Go.
The End User Configuration window displays and the associated devices that you chose display in the
Controlled Devices pane.
Step 8 Click Save Selected/Changes.
Make sure to provide end users with the following information about the User Options web pages:
The URL required to access the application. This URL is:
http://<server_name:portnumber>/ccmuser/, where server_name is the host name of the
Cisco
Unified Communications Manager.
• A user ID and default password are needed to access the application.
These settings correspond to the values you entered when you added the user to Cisco Unified
Communications Manager (see the
“Adding Users to Cisco Unified Communications Manager”
section on page 5-22).
For additional information, see the following:
• Cisco Unified Communications Manager Administration Guide, User Group Configuration.
• Cisco Unified Communications Manager Administration Guide, End User Configuration.
Specifying Options that Appear on the User Options Web Pages
Most options that are on the User Options web pages appear by default. However, the following options
must be set by the system administrator by using Enterprise Parameters Configuration settings in Cisco
Unified Communications Manager Administration:
• Show Ring Settings
• Show Line Text Label Settings
• Show Call Forwarding
Note The settings apply to all User Options web pages at your site.
To specify the options that appear on the User Options web pages, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose System > Enterprise
Parameters.