Cisco Systems 8945 IP Phone User Manual


 
7-2
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-20851-01
Chapter
Status Menu
Status Menu
To display the Status menu, press the Applications button and then select Administrator Settings >
Status. To exit the Status menu, press the Exit softkey.
The Status menu includes theses options, which provide information about the phone and its operation:
Status Messages—Displays the Status Messages screen, which shows a log of important system
messages. For more information, see the
“Status Messages Screen” section on page 7-2.
Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics.
For more information, see the
“Network Statistics Screen” section on page 7-6.
Call Statistics—Displays counters and statistics for the current call. For more information, see the
“Call Statistics Screen” section on page 7-8.
Status Messages Screen
The Status Messages screen displays the 10 most recent status messages that the phone has generated.
You can access this screen at any time, even if the phone has not finished starting up. Table 7-2 describes
the status messages that might appear. This table also includes actions you can take to address errors.
To display the Status Messages screen, follow these steps:
Procedure
Step 1 Press the Applications button.
Step 2 Select Administrator Settings.
Step 3 Select Status.
Step 4 Select Status Messages.
To remove current status messages, press the Clear softkey.
To exit the Status Messages screen, press the Exit softkey.
Active Load Version of firmware currently installed on the
phone.
Display only—cannot configure.
Last Upgrade Date of the most recent firmware upgrade. Display only—cannot configure.
Active Server IP address or name of the server to which the
phone is registered.
Display only—cannot configure.
Stand-by Server IP address or name of the standby server. Display only—cannot configure.
Table 7-1 Model Information Settings for the Cisco Unified IP Phone 8941 and 8945
Option Description To Change