Filter
Top Products
5-15
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-20851-01
Chapter
Telephony Features Available for the Cisco Unified IP Phone
Time-of-Day Routing Restricts access to specified telephony features by
time period.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide,
Time Period
Configuration.
• Cisco Unified Communications Manager
System Guide,
Time-of-Day Routing.
Time Zone Update Updates the Cisco Unified IP Phone with time zone
changes.
For more information, see the Cisco Unified
Communications Manager Administration
Guide, Date/Time Group Configuration.
Transfer Allows users to redirect connected calls from their
phones to another number.
Some JTAPI/TAPI applications are not
compatible with the Join and Direct Transfer
feature implementation on the Cisco Unified
IP Phone 8941 and 8945 and you may need to
configure the Join and Direct Transfer Policy
to disable join and direct transfer on the same
line or possibly across lines. For more
information, see the “Join and Direct Transfer
Policy” section on page 5-16.
Transfer - Direct
Transfer
Transfer—The first invocation of Transfer will
always initiate a new call by using the same
directory number, after putting the active call on
hold.
Direct Transfer—This transfer joins two
established calls (call is in hold or in connected
state) into one call and drops the feature initiator
from the call. Direct Transfer does not initiate a
consultation call and does not put the active call on
hold.
Some JTAPI/TAPI applications are not
compatible with the Join and Direct Transfer
feature implementation on the Cisco Unified
IP Phone 8941 and 8945 and you may need to
configure the Join and Direct Transfer Policy
to disable join and direct transfer on the same
line or possibly across lines. For more
information, see the “Join and Direct Transfer
Policy” section on page 5-16.
For more information, see the Cisco Unified
Communications Manager System Guide,
Understanding Directory Numbers.
Video mode Allows a user to select the video display mode for
viewing a video conference, depending on the
modes configured in the system.
For more information:
• Refer to Cisco Unified Communications
Manager Administration Guide,
“Conference Bridge Configuration”
chapter.
• Refer to Cisco Unified Communications
Manager System Guide, “Understanding
Video Telephony” chapter.
Video Mute Mutes the video from the phone screen during a
video call.
Requires no configuration.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference